Modern solid state electronic regulator for models with Bosch charging system

Bolts to original mounting point but this replacement part is not as tall as the old metal regulator. Also known as Guzzi ref. 17703800. Replaces ELA29704

See our Bosch fault finder page for help diagnosing problems on your Bosch charging system. The original type mechanical regulator is no loger available

 2 in stock

29703800-z 29703800 GU29703800 29 70 38 00
 2970 3800 2970.3800 29.70.38.00

Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.

This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

 2 in stock

 14730554 GU14730554 14 73 05 54
 1473 0554 1473.0554 14.73.05.54

Thick shim washer for valve spring

Used as lower valve spring shim washer

 2 in stock

 13037200 GU13037200 13 03 72 00
 1303 7200 1303.7200 13.03.72.00

Piston ring set

4 ring set

 2 in stock

14060700-z 14060700 GU14060700 14 06 07 00
 1406 0700 1406.0700 14.06.07.00

Cam follower / tappet, standard size

Not for PI / hydraulic tappet models produced between 2003 and 2006

 2 in stock

 17045860 GU17045860 17 04 58 60
 1704 5860 1704.5860 17.04.58.60

Inlet Valve

41mm diameter. Also known as Guzzi ref. 29036050

 2 in stock

 13036000 GU13036000 13 03 60 00
 1303 6000 1303.6000 13.03.60.00

Heavy duty spring used for centrestand and sidestand applications

 2 in stock

12434001-z 12434001 GU12434001 12 43 40 01
 1243 4001 1243.4001 12.43.40.01

Sidestand spring, two required on most models

Short type

 2 in stock

17434060-z 17434060 GU17434060 17 43 40 60
 1743 4060 1743.4060 17.43.40.60

Central tank mount rubber, mounts on central frame tube

1 required, this is the only frame rubber used for the tank on small twins

 2 in stock

 14107100 GU14107100 14 10 71 00
 1410 7100 1410.7100 14.10.71.00

Standard 2Kg throttle return spring

 2 in stock

 13937100 GU13937100 13 93 71 00
 1393 7100 1393.7100 13.93.71.00